Development of a 2D Vibration Stage for Vibration-assisted Micro-milling

论文摘要

Vibration-assisted machining（VAM） has the advantages of extending tool life,reducing cutting force and improving the surface finish.Implementation of vibration assistance with high frequency and amplitude is still a challenge,especially for a micro-milling process.In this paper,a new 2D vibration stage for vibration-assisted micro-milling is developed.The kinematics of the milling process with vibration assistance is modeled,and the effects of vibration parameters on the periodic tool-workpiece separation（TWS） is analyzed.The structure of the vibration stage is designed with flexure hinges,and two piezoelectric actuators are used to drive the stage in two directions.An amplifier is integrated into the vibration stage,and the dynamics of the whole vibration system are identified and analyzed.Micro-milling experiments are conducted to determine the effects of vibration assistance on cutting force and surface quality.

论文目录

文章来源

类型: 期刊论文

作者: Shaoke WAN,Naresh Kumar MAROJU,Xiaoliang JIN

来源: Instrumentation 2019年01期

年度: 2019

分类: 工程科技Ⅱ辑,信息科技,工程科技Ⅰ辑

专业: 金属学及金属工艺

单位: Key Laboratory of Education Ministry for Modern Design&Rotor-Bearing System,Xi'an Jiaotong University,Department of Mechanical Engineering,University of British Columbia

基金: supported by NSERC-Discovery FundsRGPIN-2018-04911,partly supported by China Scholarship Council

分类号: TG54

DOI: 10.15878/j.cnki.instrumentation.2019.01.009

页码: 98-108

总页数: 11

文件大小: 2096K

下载量: 4

相关论文文献

• [1].Hydrogen storage thermodynamics and dynamics of La-Mg-Ni-based LaMg_(12)-type alloys synthesized by mechanical milling[J]. Rare Metals 2019(12)
• [2].Structure and electrochemical hydrogen storage behaviors of Mg-Ce-Ni-Al-based alloys prepared by mechanical milling[J]. Journal of Rare Earths 2020(10)
• [3].Structure and electrochemical performances of Mg_(20-x)Y_xNi_(10)(x=0-4) alloys prepared by mechanical milling[J]. Rare Metals 2019(10)
• [4].Hydrogen storage thermodynamic and kinetic characteristics of PrMg_(12)-type alloys synthesized by mechanical milling[J]. Journal of Iron and Steel Research(International) 2017(02)
• [5].Structure and electrochemical hydrogen storage characteristics of Ce-Mg-Ni-based alloys synthesized by mechanical milling[J]. Journal of Rare Earths 2017(03)
• [6].Comparative research of plasma-assisted milling and traditional milling in synthesizing AIN[J]. Plasma Science and Technology 2017(06)
• [7].A review of chatter vibration research in milling[J]. Chinese Journal of Aeronautics 2019(02)
• [8].Optimization of thermoelectric properties of n-type Bi_2(Te,Se)_3 with optimizing ball milling time[J]. Rare Metals 2018(04)
• [9].An investigation on electrochemical hydrogen storage performances of Mg-Y-Ni alloys prepared by mechanical milling[J]. Journal of Rare Earths 2015(08)
• [10].Rapid synthesis of MoSi_2-Si_3N_4 nanocomposite via reaction milling of Si and Mo powder mixture[J]. International Journal of Minerals Metallurgy and Materials 2013(11)
• [11].Fabrication and microstructure of nanostructured Mg-3Ni-2MnO_2 by ball milling in hydrogen atmosphere[J]. Transactions of Nonferrous Metals Society of China 2009(S2)
• [12].Hydriding and microstructure nanocrystallization of ZK60 Mg alloy by reaction milling in hydrogen[J]. Transactions of Nonferrous Metals Society of China 2009(S2)
• [13].Research on Machined Surface Veins Based on Turn-milling Technology[J]. Journal of China Ordnance 2009(04)
• [14].Mechanical alloying behaviors of Mo-Si-B-based alloy from elemental powders under different milling conditions[J]. Rare Metals 2019(07)
• [15].SnSe+Ag_2Se composite engineering with ball milling for enhanced thermoelectric performance[J]. Rare Metals 2018(04)
• [16].Design and Manufacturing of Ultra-Hard Micro-Milling Tool[J]. Transactions of Tianjin University 2014(06)
• [17].On time-domain methods for milling stability analysis[J]. Chinese Science Bulletin 2012(33)
• [18].Four-axis trochoidal toolpath planning for rough milling of aero-engine blisks[J]. Chinese Journal of Aeronautics 2019(08)
• [19].Research on cutting vibration characteristics of face-milling involute gear[J]. Defence Technology 2017(05)
• [20].Cutting tool temperature prediction method using analytical model for end milling[J]. Chinese Journal of Aeronautics 2016(06)
• [21].Structure and Electrochemical Hydrogen Storage Properties of as-Milled Mg-Ce-Ni-Al-Based Alloys[J]. Acta Metallurgica Sinica(English Letters) 2020(05)
• [22].Microstructure evolution and interface structure of Al-40 wt% Si composites produced by high-energy ball milling[J]. Journal of Materials Science & Technology 2019(04)
• [23].Photocatalytic activity of Lu~(3+)/TiO_2 prepared by ball milling method[J]. Journal of Rare Earths 2018(08)
• [24].Structural characterization of AA 2024-MoSi_2 nanocomposite powders produced by mechanical milling[J]. International Journal of Minerals Metallurgy and Materials 2013(03)
• [25].Simulation and analysis of aerodynamics for high speed face milling cutters[J]. Science China(Technological Sciences) 2010(09)
• [26].Effect of milling atmosphere on structural and magnetic properties of Ni-Zn ferrite nanocrystalline[J]. Chinese Physics B 2015(04)
• [27].Evolution of structure and magnetic properties in PrCo_5 magnet for high energy ball milling in ethanol[J]. Chinese Physics B 2015(08)
• [28].Chatter stability prediction in four-axis milling of aero-engine casings with bull-nose end mill[J]. Chinese Journal of Aeronautics 2015(06)
• [29].Hydriding/dehydriding behaviors of La_2Mg_(17)-10 wt.%Ni composite prepared by mechanical milling[J]. Journal of Rare Earths 2013(01)
• [30].High-content graphene nanoplatelet reinforced aluminum composites produced by ball milling and hot extrusion[J]. Science China(Technological Sciences) 2020(08)